-- Metalworking Fluids that are Earth Friendly and Renewable To Order Toll Free 1-866-929-7200
Performance Biolubes--- NT2000 Water Soluble Coolant-NEW!
Situation:
CNC Machine Shop performs a critical production sawing operation with
tight length and squareness tolerances. Blade life is critical to
control part size, reduce scrap, increase productivity and reduce saw
blade costs.
Material: A36 hot roll-formed “L” shaped bars, un-annealed with case hardness.
Tools:
Amada automatic cutoff band saw machine with Lenox band saw blades and
high quality, major brand name, water soluble coolant.
Blade life:
Previous blade life averaged 5000 pieces per blade. Failure mode was
based on cutting time, motor load and quality of cut. John, the
operator, has over 30 years experience cutting similar jobs as a cutting
service.
Solution: The coolant was replaced with NT2000 coolant from Performance Biolubes.
Results:
With the high lubricity of NT2000, blade life immediately increased
from 5000 pieces to 9000 pieces. Blade costs were reduced, part quality
improved and productivity increased. Product mixed easily, produced no
foam and left very friendly residues.
Other Applications:
NT2000 is very effective on most machining operations including milling,
turning, drilling, tapping and grinding. It is used successfully on
both ferrous and nonferrous metals. NT2000 is also a great lubricant for
metal stamping and forming operations. NT2000 has polarity which allows
it to adhere to metal surfaces, thereby protecting the cutting tool and
reducing friction.
Health and Safety: With NT2000, John
explained, he no longer experienced alkaline burns on his skin from high
Ph bactericides in other coolants. NT2000 is very skin friendly and
will not cause dermatitis. Any vapors from NT2000 are much safer than
vapors from petroleum based coolants. NT2000 is made from vegetable oils. It does not contain petroleum, chlorinated paraffin’s, heavy metals or dangerous bactericides.
Environmental: NT2000
is made 100% from green renewable resources. It is biodegradable and
earth friendly. NT2000 can help manufacturers meet their green
initiatives and qualify for the ISO 14000 requirements. This coolant has
great bio-stability and can be recycled to reduce usage and disposal
costs.
Semi-synthetic Coolants - XXL PLUS, -Formulated for general purpose cutting and grinding and high pressure grinding. -Milling, tapping and reaming. -Gear cutting incl: hobbing, gun drilling, broaching and shaping -Sharpening high-speed steel and carbide cutting tools. -Excellent for ferrous material, cast iron and aluminum.
Cutting Oils - Premium Dual Purpose, Lightweight and Ultra light
-General purpose cutting and grinding. -Milling, tapping and reaming -Gear cutting, broaching, gun drilling and screw machining -Sharpening high-speed steel and carbide cutting tools.
CoolWay* Slideway Lubricant - ISO 46 - 68
-Formulated for ways and other sliding surfaces of machine tools such as grinders, milling machines, planers and saw guides. -For use on all flat or V-shaped surfaces. -Recommended for both vertical and horizontal ways. Metal Forming Fluid
-Formulated for all types of metal forming. -Highly effective on all metals including aluminum and stainless steel. -Formulated for hand applications - lighter formula for spray applications - special formulation for deep stamping
Quench Oil
-Formulated for all types of metal quenching. -Highly effective on all metals incl aluminum and stainless steel.
Tap - Tapping & Drilling Fluid
-Formulated for all industrial tapping, drilling and reaming operations. -Can be used on both manual or CNC machines -Highly effective on all metals incl. aluminum and stainless steel. -Recommended where surface finish and longer tool life desired.
Promote a clean environment for future generations. FEED A FARMER----REDUCE OUR DEPENDACE ON PETROL!
Order your Green Cutting Fluid Solution Today! Toll Free 1-866-929-7200
